How to fix GE RBS360 Ranges oven that will not self-clean?
If your GE Ranges oven won't self-clean, it could be due to a couple of reasons. If the oven temperature is too high, allow it to cool down before resetting the controls for a self-clean operation. Also, ensure that the oven controls are properly set by consulting the Cleaning the Oven section.
Why does my GE RBS360 oven door glass look tinted?
No. The inner oven glass of your GE Ranges is coated with a heat barrier to reflect the heat back into the oven to prevent heat loss and keep the outer door cool while baking. This is normal. Under certain light or angles you may see this tint or rainbow color.
Why is my GE RBS360 Ranges food not broiling properly?
To ensure your food broils properly in your GE Ranges, first make sure you've selected the correct broil mode. Refer to the Cooking Guide for rack position suggestions. Ensure the cookware is cool and suited for broiling. If using aluminum foil on the broiling pan and grid, fit it properly and slit as recommended. In some areas with lower voltage, preheat the broil element for 10 minutes.
Why is there a burning odor from the vent of my GE RBS360?
A “burning” or “oily” odor from the vent of your new GE Ranges is normal and will disappear over time. To speed up the process, set a self-clean cycle for a minimum of 3 hours. See the Cleaning the Oven section.
Why is steam coming from the vent of my GE RBS360 Ranges?
When using the ovens, it is normal to see steam coming out of the oven vents of your GE Ranges. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase.
What to do if there is pitting of the cooktop of my GE RBS360?
If there is pitting (or indentation) of the cooktop of your GE Ranges, call a qualified technician for replacement.
Why is my GE RBS360 Ranges oven will not self-clean?
Your GE Ranges oven may not self-clean if the temperature is too high. Allow the oven to cool and reset the controls. Also, ensure the oven controls are properly set.
Why does my GE RBS360 Ranges display flashes?
If the display on your GE Ranges flashes, it indicates a power failure. Reset the clock.
Why is there steam from the vent of my GE RBS360 Ranges?
It is normal to see steam coming out of the oven vents of your GE Ranges when using the ovens. The amount of visible steam will increase as the number of racks or amount of food being cooked increases.
Why does the surface unit stop glowing when turned to a lower setting on my GE RBS360 Ranges?
The surface unit is still on and hot, this is normal for GE Ranges.
Instructions and warnings for securing the range to prevent tipping.
Essential safety guidelines for using the appliance safely and preventing hazards.
Warnings about storing and using flammable items near the range to prevent fire.
Steps to take in case of a fire to prevent injury and limit fire spread.
Guidelines for safe operation of the cooktop surface units.
Important safety guidelines for operating the oven.
Safety precautions specific to the self-cleaning oven function.
How to operate the surface units and understand indicator lights.
Instructions for adjusting the oven temperature thermostat.
Steps for cleaning the oven interior manually with soap and water.
How to operate the self-cleaning cycle and important safety considerations.
Instructions for safely removing and reinstalling the oven door.
To Next Page
General