Read these instructionscompletely and carefully.
WARNING'!
Anti-Tip Bracket
• ALL RANGES CAN TIP
• INJURY COULDRESULT
• INSTALLANTI-TIP DEVICE
PACKEDWITH RANGE
• SEEINSTRUCTIONS
ToolsYouWill Need
• Phillips head s(rewdriver
} t/ f• 1,_ or adlustable wrencll
• Flat blade s(rewdriver
Anti-TipBracketInstallationInstructions
Anti-tipbracketattachesto thefloortoholdeitherrear
rangeleg.Whenfasteningtothefloor,besurethatthe
screwdoesnotpenetrateelectncalwlYingorplumbing.If
youcannotbesureof this,useashorterscrewthatwill not
penetratethroughthefloonbg
[] Decide whether tile anti-tip bracket xdll be
installed on tile right or leviside of the range
location.
[] Screw dm bracket securely to tim floor wifll
tlle screw provided. The screw is self drilling
in w{_o(1,pl}_v{)od,pmticle and chip board,
and most metal flmning. If attaching to
mason U, )_)u can Nly suitable screws and/or
anchors at hmdwme stores. Use a masomy
drill to drill the required holes.
[] If the bracket side of the range is next to a
(abinet, plate the brat ket against balk wall
and (al)inet.
If there is no ac!jacent cabinet, detemfine
where the location of the range side (painted
outside panel) will be. Place the bracket with
its outside edge at this location and against
the back wall.
Outside edge of bracket
shouldbeflushwith tbe Wall behindrange
outsideof the range
Adjacentcabinet ]
_i, orfinallocation ]
Anti-tip bracket / Wall
[] Using tile x_Tench,back out tlle fi)m range
legs at least two turns. Level tlle range. See
tile Protect YourFloor and Levelingthe Range
infi)m_afion in tim Installationthe range
se(tion of this manual for leveling
infi)m_ation.
[] Slide tile range into place.
27
To Next Page
Loading...
