Read these instructions completeIF and carefu#y_
WhenAll HookupsAre Complete
[] Make sure all _ontrols are left in the OFF
position.
[] Make sure tim flow of combustion and
ventilation air to the range isunobstructed.
MobileHomeInstallation:
Be sure the installation of this range in a
manutacmred or mobile home conli)m_s with the
Manufltcmred Home ( onstmction and Safely
Title 24 CFR, Pmt 3280 [ti)mmrly the Federal
Standard ti)r Mobile Home Construction and
Salely Title 24, H.U.D. (Pmt 280)] or when such
standards me not applicable, the Smndmd ti)r
Manutitcmred Home Installations 1984
(Manufitcmred Home Sites Communities and
Set-Ups), ANSI A225. l-latest edition, or with local
cocDs. In Canada, mobile home installation nmst
be in accordance with the cunent CAN/CSA
Z241!/MH Mobile Home Installation Code.
ModelandSerialNumberLocation:
The serial plate lot y_Jm range is located under
the cooktop on the right side of the burner box.
In addition to the model and serial numbers, it
tells y{m the ratings of the burners and type offl_el
and pressure t_)r wlfich the range was a_!iusted
when it left the titcto_y.
When ordering parts, always include the model
number and serial number to ensure proper
replacement pmts. Pmts m W be obtained
through General Electric/Hotpoint Facto U
Seccice Centers or General Electric/Hotpoint
m_thorized (ustomer Care <'sec_icers.
?3
To Next Page
Loading...
