Check List
38
SecoVac 3.3kV-27kV Embedded Pole Vacuum Circuit Breaker
Ordering Check List
Type Code: Qty:
Rated Voltage
ŕ 3.3kV ŕ 7.2kV ŕ 12kV ŕ ŕ ŕ 24kV ŕ 27kV
Rated Current
ŕ 630A ŕ ŕ 1600A ŕ 2000A ŕ ŕ ŕ 4000A
Rated Short-Circuit Breaking Current
ŕ ŕ ŕ 40kA
Pole Center Distance (P)
ŕ ŕ 210mm ŕ
Tripping/Closing Release(TC, CC)
ŕ DC24V ŕ DC30V ŕ DC36V ŕ DC48V ŕ DC60~72V ŕ DC110-130V
ŕ DC110V ŕ ŕ DC220-240V
ŕ AC110V ŕ AC220V ŕ AC110-130V ŕ AC220-240V
Charging Motor (M)
ŕ
DC24V
ŕ DC30V ŕ DC36V ŕ DC48V ŕ DC60V ŕ DC230-240V
ŕ DC110V ŕ ŕ AC110V ŕ ŕ AC220V ŕ AC230-240V
Secondary Wiring
ŕ Standard
ŕ Nonstandard (Refer to drawing with number:
)
Withdrawable Type SecoVac Earthing
ŕ
Earthing on both sides of SecoVac withdrawable unit
ŕ Other
Fixed Type SecoVac
Secondary
Wiring
ŕ
Through terminal block above SecoVac frame
ŕ
Through secondary plug with socket
ŕ
Through secondary socket above SecoVac frame with plug
ŕ Other
IEC SecoVac 3.3-27kV (VB2 Plus) Checking List
COUNTRY:
BASIC
Under Voltage Release (UVR)
ŕ DC24V ŕ DC30V ŕ DC36V ŕ DC48V ŕ DC60~72V ŕ DC110-130V
ŕ DC110V ŕ ŕ DC220-240V
ŕ AC110V ŕ AC220V ŕ AC110~130V ŕ AC220~240V
Blocking Magnet of SecoVac withdrawable
Unit (ZC)
ŕ DC220V ŕ DC110V ŕ AC220V ŕ AC110V
ŕ Other
Other Special Requirement
(Please list other special requirement if any, and attach drawings or attachment)
L-Frame
ŕ Not required ŕ Required (Extra price needed)
ŕ With Earthing switch ŕ Without Earthing switch
Blocking magnet of closing circuit loop (BC)
ŕ DC220V ŕ DC110V ŕ AC220V ŕ AC110V ŕ Other ŕ Not required
Anti-Pump Relay (K0)
ŕ Required ŕ Not required
OPTION 2: (Extra expense is required.)
Racking Handle Pcs
Charging Lever Pcs (1 pc available for every unit of VCB)
Secondary Sockets Assembly With
ŕ Not required ŕ Required (Extra price needed)
OPTION 3: (Extra expense is required.)
OPTION 1:
PROJECT NAME: PO NO.:
By: (Signature & Stamp)
Remark:
1 Please tick
Ĭ
in
ŕ
and send this checking list along with ocial purchase order.
2 One secondary socket with jacks is oered for each SecoVac. One operation lever and one charging lever is oered for each ve SecoVac of each
project. Additional quantity required beyond above will be charged.
3 "Standard" herein means the solutions listed in SecoVac brochure. Should you have any question, please feel free to contact us.
4 If Option 1 or 2 is not ticked, SecoVac will not be equipped with related function. If Option 2 or other nonstandard solution is required, it will be charged
additionally, and the delivery time will be longer.
To Next Page
Loading...
Need help?
General
