Description and operation
Description of the interrupting chambers
GE Information08- 2016 L12- 105EN/04
3/4
Upper housing
Description
The upper housing encloses the movement transfer mechanism (15) from the
operating tie- rod (8) to the moving contact (4) of the two chambers.
Diagram
15
8
4
4
Parts table
The table below gives the housing internal and peripheral components :
Mark Component Function
(4) Moving contact It is worked by the operating
mechanism and contains the blasting
device.
(8) Operating tie- rod T ransmits the movement to the moving
contact of the two chambers.
(15) Mechanism T ransfer of the movement.
To Next Page
Loading...
