Grid Solutions
2 SF6 Pressure Equipment.
2.1 See SF
6
Safety Sheet.
2.2 An effective pressure of 300 hPa, used for the
transport and storage of our products, is not
regarded as a potential hazard.
2.3 Always fill the unit using the appropriate equipment,
which should include a safety valve.
2.4 Do not inflate over and above the prescribed
pressure.
2.5 It is strictly forbidden to release SF
6
to atmosphere.
All discharged gas must without exception be
recovered.
3.1 Circuit Purging.
This must be done under pressure. Use the
appropriate equipment.
3.2 Hydraulic Control Unit.
The doors must be kept shut except when control
tests are being carried out.
To Next Page
Loading...
