3. Test an emergency panic icon and trip at least one sensor of each type (fire,
intrusion, etc.) to verify that the appropriate alarms are working correctly. There
could be a 30 second delay on intrusion devices.
4. When you finish testing the system, call the central station to verify that the
alarms were received.
Note: If your system is not connected to a central monitoring station you won’t be
able to perform the communication test.
System download
You can initiate a download call to program your system with the settings specified
by your installer. Use this feature only when instructed by your installer or dealer.
To initiate a download:
1. Enter the Status & Settings menu.
2. Scroll until System Tests is listed, Press Enter.
3. Enter your master code and press OK.
4. Press the System Download icon.
Simo
n XTi User Manual 33
To Next Page
Loading...
