Need help?Do you have a question about the GE Simon XTi and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | Simon XTi |
| Category | Security System |
| Language | English |
Covers home security principles and the different arming levels available on the Simon XTi system.
Details how arming makes sensors active for alarms and disarming makes them inactive.
Instructions for disarming the system by pressing the DISARM button and entering your access code.
Steps to arm the system for doors and windows only, ensuring all are closed before arming.
Instructions for arming motion sensors only, including exit delay and beeps.
Steps to arm doors, windows, and motion sensors, including exit delay and beeps.
Explains exit and entry delay features, allowing time to arm/disarm the system upon entering/leaving.
Allows a delay after entering to disarm the system before an alarm occurs.
Time given to exit the home after arming before the system becomes armed.
Allows learned sensors to be bypassed when armed, preventing alarms from open sensors.
Covers alarm management, including bypassing sensors, listening to alarms, and preventing accidental alarms.
Steps to manually bypass or unbypass sensors using the panel interface and master code.
How to listen for alarm information and cancel an active alarm using the panel.
Guides on configuring user options and system settings for the Simon XTi.
Details on Master, User, and Duress codes used for panel operations and security.
Allows learned sensors to be bypassed when armed, preventing alarms from open sensors.
Menu to run sensor and communication tests, and initiate phone calls for system diagnostics.
Accesses advanced programming options for codes, security, phone numbers, and siren settings.
Guides on performing various tests for system components and communication.
Steps to test individual sensors to ensure they send strong signals to the panel.
Verifying that the system reports alarms successfully to the central monitoring station.
To Next Page
