29-0047-78 AC 04-2014
2
1. Health and Safety 3
1.1. Scope 3
1.2. Intended use 3
1.3. Safety Notices 3
1.4. General Safety 4
1.5. General Hazards 5
1.6. Unpacking and Installation 5
2. Operating and Maintenance 7
2.1. Preparation before starting 7
2.2. Performing a run - cuvettes 7
2.3. Performing a run – Micro Volume Instruments 8
2.4. Post run procedures 9
2.5. User Maintenance 9
2.6. Novaspec III/Plus Lamp Change 10
2.7. Ultrospec 8000/9000 Lamp Change 10
3. Troubleshooting 11
3.1. Emergency Procedures 12
3.2. Recycling Procedures 12
3.3. Recycling of hazardous substances 12
3.4. Disposal of electrical components 12
3.5. Specifications 13
3.6. Manufacturing information 13
4. Legal 14
Page finder
To Next Page
Loading...
