GE T2100-ST1 Service Manual

Troubleshooting
2097937-002 Rev G T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V 91
11 March 2019
Smart Power Supply Error Code 4 Flow Chart 1M “Over Speed
Motor Controller Error (4)”
1M
Is the Red LED D13
flashing 4 times with 4
second pause on the
Smart Power Supply
PCBLF0443-1?
No
Yes
Turn the treadmill power switch
OFF (O) for 10 seconds then turn
the power switch ON (-).
Is the Red LED D13 on
the Smart Power
Supply PCBLF0443-1
on continuously?
Yes
No
Is the Red LED D13
flashing on the Smart
Power Supply
PCBLF0443-1?
Yes
Treadmill should
be operational.
No
Send a Start Belt Command or Press
Start if equipped with controller
increase speed to 10mph.
With the treadmill
running at 10.0 mph
for 1 minute, is the
Red LED D13 on?
Return Treadmill
to service.
Replac
e Drive
PC2303-012-N
Yes
No
Go To
Page 1I
Go To
Page 1I

GE T2100-ST1 Specifications

General

Brand	GE
Model	T2100-ST1
Category	Treadmill
Language	English