Remote Buttons
The remote control is capable of controlling your VCR and many
brands of televisions. If you have a GE, RCA, or ProScan TV, you
may be able to control it without programming the remote.
Component Buttons
OFF Turns off VCR when remote is set to control the VCR. Also
turns some compatible rVs on and off.
TV Turns on a compatible GE, RCA, or ProScan TV and sets the
remote to control the TV. Also used with the OFF button to turn
on a different brand of TV (if programmed) and sets the remote
to control the TV.
VCR Turns on a compatible GE, RCA, or ProScan VCR and sets
the remote to control the VCR.
VCR Function Buttons
CHAN Up or Down Selects next higher or lower channel in
the VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FORWARD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow-
motion playback when tape is paused.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to previous menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR's tuner. Line
input refers to the signal coming from the component connected
to the audio/video input jacks on the back of the VCR.
MENU Brings up VCR MAIN MENU on the "IV screen.
OFF
0
REVERSE
RECORD
INF0
0
0
MUTE
TV VCR
0 0
PLAY FORWARD
%C>
STOP PAUSE
tA SEARCH
CHAN GO BACK
CLEAR MENU SPEED
18
To Next Page
Loading...
