TV With Audio/Video Jacks and Cable Box
to Unscramble Pay Channels Only
This com_ectionassumes:
• You are using a cable box only to unscramble pay channels.
• Your TV has audio/video input jacks.
This connection provides:
• Mono sound playback from VCR.
• Recording a scrambled or unscrambled channel through the
cable box while watching an unscrambled channel.
To use this connection, you must have:
• (3) coaxial cables
• (2) audio/video cables
• (1) splitter
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel.
Auto TV/'VCR setting:
• Set the Auto "I'VNCR feature to OFF. Use of the "rv.vcR
button is not required.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record a scrambled or unscrambled program and watch another
unscrambled program:
1. Begin recording a scrambled program through the cable box
using one of the recording options.
2. Select an unscrambled channel on the TV.
Ahllscrambled channels must be viewe 1
rough the VCR.
VCR
CABLE BOX
VIDEO AUDIO
RF OUT
ANTENNA
46
To Next Page
Loading...
