GE Vscan Air User Manual

Configuration
Vscan Air – User Manual 4-41
Direction GP092020-1EN Rev 18
TouchID for quick data access (Biometric authentication) (continued)
NOTE: Before enabling biometric authentication in the Vscan Air
application, make sure you have activated finger print
unlock or face recognition unlock in your display device.
Failure to do so may pop-up the following warning message
while enabling biometric authentication in the Vscan Air
application.
Figure 4-43. Biometric authentication error
Change data access PIN
Follow the procedure below to change the data access PIN.
1. Press Menu -> Configuration -> Security.
Figure 4-44. Security settings

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices