GE Vscan Air User Manual

Vscan Air Maintenance
6-42 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Transducer Element test
The transducer element test transmits/receives on each element
to determine if the element working as intended. If the Element
test fails, the failing element(s) are reported in the system logfile.
The transducer element test is part of the probe diagnostics test
which is found via the app Menu -> Diagnostics -> Run
Diagnostics.
The element test is then executed as part of a predefined test
list of diagnostic tests.
NOTE: If diagnostics fails, GEHC service will have to look through the
logfile to determine which test failed. If the transducer element
test failed, service will then be able to identify the failing
transducer element(s) and guide on further actions needed.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices