GE Vscan Air User Manual

Important safety considerations
Vscan Air – User Manual 2-13
Direction GP092020-1EN Rev 18
Electromagnetic emissions
Table 2-1: Electromagnetic emissions
Guidance and manufacturer’s declaration – electromagnetic emissions.
The Vscan Air CL probe is intended for use in the electromagnetic environment below.
The customer or the user of the Vscan Air CL should assure that it is used in such an
environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emission
EN55011
Group 1 The Vscan Air CL uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emission
EN55011
Class B The Vscan Air CL is suitable for use in all
establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic emission
EN/IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
EN/IEC 61000-3-3
Complies

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices