Scanning
Vscan Air – User Manual 5-37
Direction GP092020-1EN Rev 18
Assign Patient data manually to an existing Exam (continued)
3. Press “Edit Patient” button at top right corner and enter the
required information in the respective fields under “New
Patient” screen.
Press "Add" button to assign Patient data to the existing
exam. After successful assignment of Patient data,
application takes you to the scan screen.
Figure 5-29. Edit Exam
NOTE: Once the Patient data is assigned to an exam, you can not
re-assign or alter the patient details in that exam.
To Next Page
Loading...
