Scanning
Vscan Air – User Manual 5-49
Direction GP092020-1EN Rev 18
Assign Patient data from Modality Worklist Server to an existing exam (continued)
5. Press "Add" button to assign Patient data to the existing
exam. After successful assignment of Patient data,
application takes you to the scan screen.
Patient’s Last Name, First Name and ID are shown on the
top of the scan screen.
Figure 5-41. Add patient
NOTE: Once the Patient data is assigned to an exam, you cannot
re-assign or alter the patient details in that exam.
6. Press Patient icon to view the images/videos under the
existing exam.
To Next Page
Loading...
