Warnings
Vscan Air – User Manual 1-11
Direction GP092020-1EN Rev 18
Important Safety Considerations (continued)
• Do not use the wireless charging pad if showing visible
damages.
• To reduce risk for electrical shock, do not plug or unplug
the AC adapter from mains socket with wet hands.
• Avoid dropping or subjecting the unit and accessories to
severe impacts. This could result in electrical shock,
corrosive liquid leakage and injury.
• Keep good hand contact with Vscan Air CL during
scanning to avoid heating up of the unit and termination of
scan due to built-in temperature limits.
• Disconnect the AC adapter and the wireless charger when
not in use to avoid fire hazard.
• Keep the AC adapter and the wireless charger dry. Failure
to observe this precaution may result in fire and electric
shock.
• Before charging the Vscan Air probe it is important to be
aware of the Environmental requirements for Vscan Air CL
(refer ‘Environmental requirements’ on page 3-8) and to
read and understand information given in the Vscan Air
Battery section (refer ‘Vscan Air Battery’ on page 3-17).
To Next Page
Loading...
