GE Vscan Air User Manual

Digital tools
Vscan Air – User Manual 5-97
Direction GP092020-1EN Rev 18
2. MyRemoteShare, powered by Zoom (continued)
NOTE: To enable key functionality like screen share, audio and video
sharing, during MyRemoteShare sessions, the user must give
the following permissions to the Vscan Air app when prompted
by their mobile device:
1. Access to the microphone and camera.
2. Permission to overlay (Android only).
NOTE: Annotation feature for MyRemoteShare feature on Vscan Air is
available only on the Android platform. The annotation option
needs to be enabled on the host side to ensure that the
annotations on the remote participant side are available.
NOTE: Please refer to the below link for system and network
requirements from ZOOM for MyRemoteShare feature.
https://support.zoom.us/hc/en-us/articles/
201179966-System-requirements-for-iOS-iPadOS-and-Android
?__cf_chl_captcha_tk__=Wm.YZcuP4p4zRndl26olRQlCtCJYo.i
oiI..axXQS_o-1638101273-0-gaNycGzNDT0
NOTE: iOS devices need to enable cellular data prior to starting the
MyRemoteShare session since the Wi-Fi channel will be used
for communicating with the probe.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices