System care and maintenance
Vscan Air – User Manual 6-3
Direction GP092020-1EN Rev 18
Inspection
Inspecting the Vscan Air
Examine the following on a monthly basis (or whenever there is
a reason to assume that any issue may have occurred):
• Equipment for cracks, loose or missing hardware.
Before each use
1. Inspect the lens and the probe housing.
2. Look for damage that might allow liquid into the probe.
3. Test the functionality of the probe.
If any defects or damages are found on the Vscan Air CL
probe, do not use it. Contact GEHC.
To avoid electrical shock hazard, do not remove covers from
the Vscan Air CL.
To Next Page
Loading...
