Vscan Air Maintenance
6-10 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Manual cleaning Instructions
Manual cleaning is required to ensure the Vscan Air CL is
cleaned to the extent necessary for further processing.
When cleaning select one of the cleaning methods described
below, cleaning using wipes or cleaning using a cleaning
solution.
Cleaning using Wipes
1. Dispense a cleaning wipe from the wipe canister.
2. Hold the Vscan Air CL with the large lens facing away from
your body.
3. Gently wipe the Vscan Air CL with a cleaning wipe along the
length of the Vscan Air CL. Gently wipe the Vscan Air CL
large lens.
4. Rotate the Vscan Air CL and wipe the surface of the Vscan
Air CL. As the wipe becomes visibly soiled, discard the wipe
into clinical trash and dispense fresh wipes as needed.
5. Wrap a clean wipe around a soft nylon bristle brush to
access crevasses on the surface of the Vscan Air CL. Do
not use the brush on the Vscan Air CL lenses.
6. Turn the Vscan Air CL so that the small lens is facing away
from your body.
7. Gently wipe the Vscan Air CL with the cleaning wipe along
the length of the Vscan Air CL. Gently wipe the Vscan Air
CL small lens.
8. Rotate the Vscan Air CL and continue wiping until the entire
surface of the Vscan Air CL has been wiped.
9. Visually inspect the Vscan Air CL for any remaining soil and,
if necessary, repeat steps 2 through 8 until the Vscan Air CL
is visibly clean.
NOTE: Pay special attention to lenses, edges and groves.
To Next Page
Loading...
Need help?
General
