GE Vscan Air User Manual

Preparing Vscan Air CL for Use
3-18 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Power plugs
The AC adapter power plug requirement for the country or
region is shipped together with the Vscan Air CL according to
purchase order.
Figure 3-8. Power plugs
Voltage requirements
The AC adapter will function on voltage from 100 to 240 VAC
and 50/60 Hz.
Charging the battery
Place the Vscan Air CL probe on the wireless charging pad as
shown in ‘How to charge the Vscan Air CL’ on page 3-4
1. Type C - Europe, Turkey, Korea, Indonesia,
Philippine
s, Thailand, Viet
nam, Israel, Russia,
Brazil, Chile, Egypt
2.
Type A - USA, Canada, Japan, Taiwan, Mexico
3.
Type G - United Kingdom, Hong Kong
, Ireland,
Malt
a, Cyprus, Malaysia, Singapo
re, UAE,
S
audi Arabia
4.
Type I - Australia, New Zealand
, China,
A
rgentina
CAUTION
Only use mains power of 100 – 240 VAC. Voltage outside this
range can cause a malfunction or destroy the AC adapter.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices