GE Vscan Air User Manual

Initial use
Vscan Air – User Manual 3-29
Direction GP092020-1EN Rev 18
Display device image quality verification
Adjusting the display brightness is one of the most important
factors for optimal image quality visualization. A proper setup
displays a complete grey scale. The lowest levels should just
disappear into the black background and the highest white
should be bright, but not saturated.
Following can be done to adjust the display brightness of the
device for adequate visualization.
Figure 3-12. Display calibration
There are example reference images available in the ‘Preview
mode’. These images can be used to adjust the brightness level
of the device, so that a full range of grey scale level is visible.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices