39
Instructions for Installing WH49X10027
Brake Pad Kit
WH49X10027 Brake Pad Kit parts:
Qty
Description
1
Instructions
6
Screws
3
Brake Pads
Installation
1. Before installing brake pads, apply a coating of silicone grease (WH60X10006) to the top and bottom surfaces of
each brake pad.
2. When lubricating brake pads, make sure to keep area around screw holes free of grease. This ensures that the
underside of screws makes direct contact with brake pad surface.
WARNING
• Disconnect power to washer before servicing
• Never start washer with guards and/or panels removed
• Always reconnect ground wires after servicing
To Next Page
Loading...
