14 15
Turning On and O
Push ON/OFF to turn on/o camera.
When the camera is turned on, it will be at the same shooting
mode based on the last use. You can turn the Mode Dial on the
top to select. When using the camera for the rst-time, the
language setting page will appear.
Setting Date/Time and Language
When turning on the camera for the rst time, Date/Time and
Display Language Setup menu will appear. Use the following
procedures to set the camera to your preferences:
1. Push ON/OFF to turn on the camera.
2. Press Up/Down/Left/Right button to select the settings.
3. Press
button to conrm the settings.
Change Date/Time
1. Press
button to enter the General Setup menu, press
Left/Right button to switch the camera settings, and select
Date/Time menu.Press button to enter the Date/Time
menu.
2. Press Left/Right button to select the date settings, and
then press Up/Down button to adjust the value.
3. Press
button to conrm the settings.
To Next Page
Loading...
Need help?
General
