8.3 Lock-Out / Tag-Out (LOTO): turn-off procedure
Introduction
This section describes the recommended Lock-Out / Tag-Out (LOTO) turn-off procedure.
This section is not intended to describe or supersede a comprehensive Lock-Out / Tag-
Out (LOTO) policy that includes thorough procedures and frequent training.
WARNING
High voltage. It is essential for the safety of personnel working in
or around electrically powered equipment to follow a company
policy and procedure for Lock-Out / Tag-Out (LOTO).
Turn off the instrument
Follow the instructions below to turn off XDM or XDUO mixer.
ActionStep
Turn the system power switch to O OFF position.1
Attach a tag-out device onto the system power switch.2
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 253
8 Maintenance
8.3 Lock-Out / Tag-Out (LOTO): turn-off procedure
To Next Page
