ZP3-ECU Maintenance Manual Doc. No. 503-0800ZE-M-01
Issue 1 (01/08/2006) Page 1
Preface
This manual is intended for use by the ZP3-ECU Extinguishing Control System maintenance
personnel. It provides the following information about maintaining the Extinguishing Control
System and its associated equipment, and making sure that it operates to its optimum effect:
• Preventive maintenance (see page 4)
• Fault finding and Corrective Maintenance (see pages 7 to 16.)
Limitations
Response Time
In designing the extinguishing system, take cognisance of inherent delays between fire detection
and extinguishant release plus deliberate delays to allow for personnel evacuation.
Maintenance Faults
As with most Extinguishing Systems, the most common cause of their malfunction is lack of
routine maintenance. All routine maintenance stipulated in this manual must be completed
routinely and within the scheduled time limits.
To Next Page
Loading...
