Need help?Do you have a question about the GE NetworX Series and is the answer not in the manual?
General| Model | NetworX Series |
|---|---|
| Zones | Varies by model (e.g., 8, 16, 32, 64) |
| Partitions | Varies by model (typically 1-8) |
| Keypads | Supports multiple keypads |
| Communication | Phone line, cellular, IP |
| Power Supply | 16.5 VAC |
| Backup Battery | 12VDC, 7AH |
| User Codes | Varies by model (e.g., 48, 150, 300) |
| Event Buffer | Varies by model (e.g., 200, 500, 1000 events) |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Communication Protocol | Contact ID, SIA |
| Weight | Varies by model |
| Dimensions | Varies by model (e.g., 14.5" x 12.5" x 3.5") |
Instructions on how to access the security system using the Operator from a protected site via a TouchTone telephone.
Details on how the Operator reports the current armed or disarmed status and potential system issues.
Guide to navigating the Operator's menu system to access various security features and options.
Steps for arming the security system using the Operator when it is in a disarmed state.
Instructions on activating the 'INSTANT' or 'STAY' mode for arming the system.
Procedure for disarming the security system when it is in an armed state.
Steps to bypass or unbypass specific zones in the security system via the Operator.
How to check the status (open, bypassed, fire, tamper) of individual zones.
Guide to controlling lights and thermostat settings through the Operator.
Instructions for setting the system's date and time using the Operator.
Procedure to retrieve information about past alarms and zone statuses.
To Next Page