GE NetworX Series User Manual

THE “OPERATOR”
INTRODUCTION 3
ACCESSING YOUR SYSTEM 3
FUNCTIONS OF THE "OPERATOR" 4
SECTION I. CHECKING SYSTEM STATUS 4
S
ECTION II. USING THE MENU 5
S
ECTION III. ARMING YOUR SECURITY SYSTEM 6
S
ECTION IV. USING THE INSTANT / DELAY OPTION 6
S
ECTION V. DISARMING YOUR SECURITY SYSTEM 7
S
ECTION VI. BYPASSING ZONES 7
S
ECTION VII. ACCESSING ZONE STATUS 8
S
ECTION VIII. ACCESSING THE HOME CONTROL MENU 9
S
ECTION IX. ACCESSING DATE/TIME MENU 11
S
ECTION X. ACCESSING ALARM MEMORY 12
PROGRAMMING/CHANGING ACCESS CODES 13
ACTIVATING EMERGENCY ALARMS 14
THINGS TO KNOW ABOUT THE "OPERATOR" 14
QUICK REFERENCE BACK

GE NetworX Series Specifications

General

Model	NetworX Series
Zones	Varies by model (e.g., 8, 16, 32, 64)
Partitions	Varies by model (typically 1-8)
Keypads	Supports multiple keypads
Communication	Phone line, cellular, IP
Power Supply	16.5 VAC
Backup Battery	12VDC, 7AH
User Codes	Varies by model (e.g., 48, 150, 300)
Event Buffer	Varies by model (e.g., 200, 500, 1000 events)
Operating Temperature	0°C to 49°C (32°F to 120°F)
Communication Protocol	Contact ID, SIA
Weight	Varies by model
Dimensions	Varies by model (e.g., 14.5" x 12.5" x 3.5")