GEA HG34P Series - Operating the Shut-Off Valves; Operating Mode of the Lockable Service Connections

12
D
GB
F
E
09618-05.2012-DGbFEI
4| Compressor assembly
4.5 Operating the shut-off valves
 Beforeopeningorclosingtheshut-offvalve,releasethevalvespindlesealbyapprox.¼ofaturn
counter-clockwise.
 Afteractivatingtheshut-offvalve,re-tightentheadjustablevalvespindlesealclockwise.
Pipe connection
Pipe connection
4.6 Operatingmodeofthelockableserviceconnections
Fig. 16
Opening the shut-off valve:
Spindle: turn to the left (counter-clockwise) as far as it will go.
—> Shut-off valve completely opened / service connection closed.
Fig. 17
Opening the service connection
Spindle: Turn ½ - 1 turn to the right clockwise.
—> Service connection opened / shut-off valve opened.
Service connec-
tion closed
Connection
blocked
Spindle
Service connec-
tion opened
Spindle
Connection
open
Compressor
Compressor
Fig. 14
Fig. 15
Valve spindle seal
Release
Tighten