GEA HG34P Series - 10 Declaration of Conformity and Installation

24
D
GB
F
E
09618-05.2012-DGbFEI
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 03
for using the compressors within the European Union
(in accordance with Low Voltage Directive 2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation: HG34P
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN60034-1,EN60204-1
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(in accordance with Machinery Directive 2006/42/EC)
Themanufacturer: GEABockGmbH,Benzstraße7
  72636Frickenhausen,Tel.:07022/9454-0
hereby declares that the refrigerating compressor HG34Pcomplieswiththebasicrequirements
of Appendix II 1B of the Machinery Directive 2006/42/EC.
The following harmonised standards have been applied:
EN ISO 12100-1
EN ISO 12100-2
EN 12693
EN 349
A partly completed machine may only be put into operation when it has been established
thatthemachine,intowhichthepartlycompletedmachineistobeinstalled,conformstothe
regulations of the Machinery Directive (2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryonrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Appendix VII Part B.
Person responsible for documentation is: Wolfgang Sandkötter,Benzstraße7,72636Frickenhausen.
Frickenhausen,01.11.2011 ppa.WolfgangSandkötter,
ChiefDevelopmentOfcer