Gecko Aeware In.Xe User Manual

62
in.xe™
"Circulation pump doesn't work" flow chart
Verify if low level
programming has
been configured
properly
yes
Do you read
120 VAC for a 120
VAC Cir. Pump
(or 240 VAC for
240 VAC) on the
connector ?
Replace
Cir. Pump.
no
Replace
Accessory
Fuse
Replace Spa Pack
if you still aren’t
getting a voltage
reading.
If Circulation pump is not working,
follow this troubleshooting flow chart:
* Only available on IN.XE-5-XX-XXX

Gecko Aeware In.Xe Specifications

General

Brand	Gecko
Model	Aeware In.Xe
Category	Spa Accessories
Language	English