73
in.xe™
in.xe
™
Step by Step Field Replacement Procedure
As part of our technical support services, this section provides step
by step proper methods to facilitate the replacement of in.xe™ spa
packs systems in the field.
Tools needed:
• Phillips & flat screwdrivers
• Multimeter
• Open-Ended Adjustable Wrench
• Scraper tool
• Pliers
• GFCI tester
All procedures described in this service manual must only be
performed by qualified personnel, in accordance with the
standards applicable in the country of installation.
step by step field replacement procedure
To Next Page
Loading...
Need help?
General
