Gecko Aeware In.Xe User Manual

81
in.xe™
Use a Phillips screwdriver to loosen the terminals and remove all
electrical heater connections:
Neutral Line (N), Line 1 (L1), Line 2 (L2) and Ground Line (Ground).
Manually remove the HL probe & Temp. probe connector.
Manually remove in.flo™ connector.
Be careful not to damage any connector by twisting or pulling
too hard.
L2 L1 Ground HL Probe &
Temp Probe
in.flo™
how to replace the heater
L1N Ground HL Probe &
Temp Probe
in.flo™
240 VAC Heater (4KW or 2 KW)
120 VAC Heater (1 KW)

Gecko Aeware In.Xe Specifications

General

Brand	Gecko
Model	Aeware In.Xe
Category	Spa Accessories
Language	English