Gecko Aeware In.Xe User Manual

80
in.xe™
Using a Phillips screwdriver, loosen the six (6) screws that hold the
heater connections door in place. Once the screws are removed,
disengage the heater connections door.
Loosen and remove the four (4) screws and disengage the
heater bracket.
Warning!
Before starting removal procedure be sure to:
• Turn off electric power to the the unit.
• Ensure spa water valves are closed
(or that the spa is drained).
heater bracket
how to replace the heater
heater connections door

Gecko Aeware In.Xe Specifications

General

Brand	Gecko
Model	Aeware In.Xe
Category	Spa Accessories
Language	English