Gecko Aeware In.Xe User Manual

82
in.xe™
After disconnecting all electrical heater connections, loosen and
remove the two (2) heater nuts retaining the heater.
Disengage heater from in.xe™ pack by slightly twisting in such way
that the bottom of the heater comes out first and pull the heater
away from the pack.
Replace the defective heater with a new one, and repeat the same
procedure in reverse order to reconnect replacement heater to the
in.xe™ pack.
Heater nut
how to replace the heater

Gecko Aeware In.Xe Specifications

General

Brand	Gecko
Model	Aeware In.Xe
Category	Spa Accessories
Language	English