GEDA
®
Rubbish Chute
Assembly and Operating Manual Page 20 of 24 BL041GB Edition 05.2012
5.2 Hand winch
The hand winch is used
exclusively for pulling up/
lowering the rubbish chute.
The hand crank is inserted
into the respective chute
frame.
The hand winch can be
pinned in two positions.
When used with the
parapet clamp, the hand
winch must be moved to
the lower position. To do
this, loosen the screw,
move the hand winch and
screw the screw back in
again.
To Next Page
Loading...
