GEDA
®
Rubbish Chute
Assembly and Operating Manual Page 3 of 24 BL041GB Edition 05.2012
1 SAFETY INFORMATION / TECHNICAL SPECIFICATION 4
1.1 PROPER USE 4
1.2 OPERATION/LIMITATIONS OF THE RUBBISH CHUTE 4
1.3 MODIFICATIONS/ALTERATIONS 4
1.4 FORESEEABLE MISUSE 5
1.5 CHECKS 5
1.6 EXISTING RESIDUAL HAZARDS 5
1.7 REGARDING USE BY AUTHORISED PEOPLE 6
1.7.1 Operator/installer 6
1.8 ORDERING SPARE PARTS 6
1.9 STORAGE 6
1.10 DISPOSAL 6
1.11 DUST-PROTECTION MEASURES 7
1.12 WARRANTY 7
1.13 MANUFACTURER 7
1.14 COPYRIGHT 7
2 OBLIGATORY SAFETY INSTRUCTIONS 8
2.1 BASIC CONDUCT WHEN WORKING WITH THE RUBBISH CHUTE 8
2.2 TRANSPORT 9
2.3 ASSEMBLY 9
2.4 AVOIDING BLOCKAGES 9
2.5 REPAIR/MAINTENANCE 9
2.6 CLEANING 10
2.7 CONDUCT IN AN EMERGENCY 10
3 DUTIES OF THE OPERATING COMPANY 11
3.1 IDENTIFYING HAZARDS AT THE PLACE OF USE 11
3.2 DUTY TO PROVIDE TRAINING/QUALIFICATIONS 11
3.3 LIGHTING/PATHS 11
3.4 CHECKING CORRECT AND PROPER CONDITION AND USE 12
3.5 PROVISION OF PERSONAL PROTECTIVE EQUIPMENT 12
4 TECHNICAL DATA 13
4.1 RUBBISH CHUTE 13
4.2 FILLING FUNNEL 14
4.3 CHUTE BRANCH 14
4.4 HAND WINCH ITEM NO. 01907 14
4.5 HAND WINCH ITEM NO. 01908 15
4.6 CHUTE FRAME ITEM NO. 01904 15
4.7 PARAPET CLAMP KIT ITEM NO. 01902 15
4.8 SLOPING-ROOF FRAME ITEM NO. 01906 15
4.9 FLAT ROOF FRAME ITEM NO. 01911 16
4.10 CHAIN KIT ITEM NO. 01903 16
4.11 GUIDE RING ITEM NO. 01918 16
4.12 WEAR INSERT ITEM NO. 01919 16
5 INSTALLATION/DISASSEMBLY 17
5.1 DEFLECTION OF THE RUBBISH CHUTE 19
5.1.1 Maximum deflection 19
5.1.2 Make the distance between suspension points shorter in the area of the deflection 19
5.1.3 Use guide ring 19
5.1.4 Use wear insert 19
5.2 HAND WINCH 20
5.3 INSTALLATION ON THE SCAFFOLDING 21
5.4 INSTALLATION ON A WINDOW REVEAL OR PARAPET WALL 22
5.5 INSTALLATION ON A SLOPING ROOF 23
5.6 INSTALLATION ON A FLAT ROOF 24
5.7 DISASSEMBLY 24
To Next Page
Loading...
