Geemarc CL400 - Using the Headset (Option); Using the Neckloop (Option)

11 - USE THE HEADSET WITH MICROPHONE
(OPTION)
Headset: If you wish to answer or make call by
using a Geemarc headset ref: HEADSCL_BLK,
connect the headset plug in the headset socket
located behind your phone.
- Press the
key to get the dial tone.
- Dial the number.
Note: You can adjust the reception volume and
tone level with the VOLUME and TONE slide button
located on the top of the phone (if function is ac-
tive) and the sending level with the 3 position switch
located on the right side.
12 - USE THE NECKLOOP (OPTION)
Neckloop: If you wish to answer or make call by
using a neckloop, connect the neckloop in the
neckloop plug located behind your phone.The
neckloop is now ready to use.
USING THE PHONE
29