28
Subject to technical modications
10.4.3. New assignment of all QE1008-W sensors
For a new assignment of all QE1008-W sensors, all current (saved) assignments of the wireless
receiver can be deleted at the same time.
You cannot delete just one saved assignment on the receiver.
Sequence step 1
1. The wireless receiver must be connected to the computer. (the wireless receiver is
automatically in operation mode)
2. Unscrew the cover of the wireless receiver.
3. Press and hold the blue button
02
~10 seconds until all LEDs come on once.
→ All assignments are deleted.
4. Press the blue button
02
briey once. The rst assignment slot (1.1) is selected. Press the
button several times in succession to select the respective assignment slots (apparent from
the dual LEDs
01
which come on). Each dual LED (red/green) represents one assignment
slot with the corresponding slot number.
01 8 dual LEDs represent 8 assignment slots
(1.1) (1.2) (2.1) (2.2) (3.1) (3.2) (4.1) (4.2)
02 Blue function key
01
02
5. The selected assignment slot is ready for a logon or new assignment.
The wireless receiver now searches for a sensor.
To Next Page
Loading...
Need help?
General
