Why is the connection to my Gefran Measuring Instruments sensor not stable?
The connection to the Gefran Measuring Instruments sensor might be unstable because the receiver's stored frequency is being used by other devices nearby. To resolve this, reassign the QE1008-W sensor.
What to do if my Gefran Measuring Instruments measurement does not produce a useful result?
If your Gefran Measuring Instruments measurement isn't producing useful results, consider the following: * Check if the correct sensors are fitted as pairs. * Ensure the sensor pair is placed exactly opposite each other (180°) and parallel at the same position. * Verify the correct unit has been set in the display software. * Make sure the sensors are secure and don't wobble. * Ensure the measurement site and magnets are clean. * Check for any damage to the foil or strain gauge.
What to do if the 'Sensor to receiver' connection keeps disconnecting on my Gefran Measuring Instruments?
If the 'Sensor to receiver' connection for your Gefran Measuring Instruments keeps disconnecting: 1. Switch off the sensor, keep a distance of 1 meter to the receiver and switch it back on again. 2. Ensure the sensor is reassigned with the correct slot number.
What to do if the 'Computer to USB device' connection does not work on my Gefran Measuring Instruments?
If the 'Computer to USB device' connection for your Gefran Measuring Instruments isn't working: 1. Exit the display software. 2. Reconnect the device. 3. Restart the software.
General| Brand | gefran |
|---|---|
| Model | QE1008-W SET |
| Category | Measuring Instruments |
| Language | English |
Explains symbols used in the manual for safety.
General accident prevention and safety legislations.
Manual availability and adherence requirements.
Defines the intended use and scope of the sensors.
Conditions voiding liability and warranty.
Overview of QE1008-W sensors for force and strain measurement.
Lists items included in the QE1008-W sensor kit.
Explains magnetic press-on technology and applications.
Technical specifications for the QE1008-W sensor unit.
Technical dimensions for the QE Booster (Bluetooth receiver).
Technical dimensions for the USB transceiver module.
Defines technical terms like DMS, FS, Accuracy, Linearity, Hysteresis.
Instructions for mounting sensors for specific measurement types.
Steps to prepare for sensor mounting, including position and surface.
Detailed steps for correctly positioning the sensor on the tie bar.
Details on sensor components, LED status, and button functions.
Operation and control of the QE Booster device.
Installation and operation of the Sensormate mobile application.
Details on the wireless receiver's LEDs and button functions.
Steps to activate the sensor system and connect to the PC.
Procedure for assigning a QE1008-W sensor to a wireless receiver slot.
Process for deleting and reassigning all sensors to the wireless receiver.
Guide on how to measure strain distribution on tie bars.
Method for measuring tie bar bending and detecting cracks.
Procedures for inspecting the sensor's foil and magnets.
Specific inspection instructions for the sensor foil.
Specific inspection instructions for the sensor magnets.
Instructions for charging and status display of rechargeable batteries.
Information on sensor calibration and sending for service.
To Next Page
