Gehl RS6-34 - Page 218

RS5-34 Telescopic Handler SLAVE CYLINDER
PRINTED IN U.S.A. 606-4 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 10
G0905012
Install the retainer bolt (1) and nut (2) in the upper
pivot pin.
STEP 11
G0905013
Remove the lifting strap and hoist from the slave
cylinder.
STEP 12
G0905007
Using a pry bar, extend the slave cylinder rod enough
to install the lower pivot pin.
Install the lower pivot pin.
NOTE:
Align the pivot pin holes with the holes in the
cylinder mount.
STEP 13
G0905006
Install the retainer bolt (1) and nut (2) in the lower
pivot pin.
STEP 14
Remove the plugs and plugs from the hydraulic
fittings and hoses.
2
1
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com