Upgradeable PDU Instruction Manual70
© 2017 Geist
GM1157
Chapter 4 - Final Checkout
Final Checkout
Technical Support
Resetting PDU
Should the PDU lose communication, the processor may be manually rebooted without affecting power
to the outlets. Pressing the reboot button on the face of the IMD will cause the processor to reboot.
The web interface will remain off-line during boot up. For more information, see the Interchangeable
Monitoring Device section of this manual.
Service and Maintenance
No service or maintenance is required. Do not attempt to open the PDU or you may void the warranty.
There are no serviceable parts inside the PDU other than the field replaceable Interchangeable
Monitoring Device (IMD). It is recommended that power be removed from the unit before installing or
removing any equipment.
The Interchangeable Monitoring Device is designed to be field replaceable by qualified service
personnel only. The IMD is designed to be replaced while the PDU is still connected to AC Mains
power. Please refer to the IMD section of this document for removal and installation instructions.
More Technical Support
http://geistglobal.com
Americas
· 1 888 630 4445
Europe and Middle East
· From within the UK 0845 026 3853
· From abroad +44 845 026 3853
Asia
· English +1 888 630 4445 (US number)
· Chinese +86 755 8663 9505
Email: support@geistglobal.com or contact your distributor
Technical Support Form: http://www.geistglobal.com/Tech-Support
To Next Page
Loading...