21
ERROR CODES
LIST OF ERROR CODES ON THE AX-100
ERROR CODE DESCRIPTION
E1
Incorrect key operation.
Press the CLR button to cancel
E2
The amount entered is too large.
Press the CLR button to cancel and try again
E3
The registration is not finished.
Press CASH to finalise the transaction
E4
Password is required.
Press the CLR button and register by password
E5
Clerk ID button required.
Press the CLR button and enter the Clerk ID
E6
General error.
Press the CLR button and try again
E7
Tender error. Press the CLR button and finalize
the transaction with a method of payment
E8
ID ON/OFF has been pressed and the receipt is
ineffective See Main Flag 1 bit 8
E9
The button has been turned from the ‘P’ position
before programming has been completed
Ec
The memory for the number of items has been
exceeded. Finalize the sale
Er
The report memory is full.
Print the Z 1 & Z2 reports
EP1
The printer head is too hot. The error will clear
once the printer head has cooled down
EP2
The printer is short of paper.
Please install a new paper roll
E
General error.
Press the CLR button and try again
To Next Page
Loading...
