www.gemu-group.com4 / 26GEMÜ 1235
24V / IO-Link, 3E, 4E
1 General information
1 General information
1.1 Information
- The descriptions and instructions apply to the standard versions. For special versions not described in this document the ba-
sic information contained herein applies in combination with any additional special documentation.
- Correct installation, operation, maintenance and repair work ensure faultless operation of the product.
- Should there be any doubts or misunderstandings, the German version is the authoritative document.
- Contact us at the address on the last page for staff training information.
1.2 Symbols used
The following symbols are used in this document:
Symbol Meaning
Tasks to be performed
Response(s) to tasks
– Lists
The following LED symbols are used in the documentation:
Symbol LED conditions
Off
Lit (on)
Flashing
1.3 Warning notes
Wherever possible, warning notes are organised according to the following scheme:
SIGNAL WORD
Type and source of the danger
Possible
symbol for the
specific
danger
Possible consequences of non-observance.
Measures for avoiding danger.
Warning notes are always marked with a signal word and sometimes also with a symbol for the specific danger.
The following signal words and danger levels are used:
DANGER
Imminent danger!
▶ Non-observance can cause death or severe injury.
WARNING
Potentially dangerous situation!
▶ Non-observance can cause death or severe injury.
CAUTION
Potentially dangerous situation!
▶ Non-observance can cause moderate to light injury.
To Next Page
Loading...
Need help?
General
