Need help?Do you have a question about the GEM 3040 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Data Hold | Yes |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | Less than 80% RH |
| Power Supply | 9V Battery |
| DC Voltage Range | 200mV/2V/20V/200V |
| AC Voltage Range | 200V |
| DC Current Range | 200µA/20mA/200mA/10A |
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ |
| Display | 3 1/2 Digit LCD |
| Measurement Range | As per individual functions |
Details self-tests, error output, protection class, and EMC/SELV compliance.
Details operating pressure and pressure rating for different DN sizes.
Includes protection class, weight, and measuring range for different DN sizes.
Specifies the accuracy and error of measurement for different DN sizes.
Covers duty cycle, supply voltage, connection type, and output signals.
Lists necessary checks and preparations before proceeding with installation.
Specifies the correct orientation and flow direction for accurate measurement.
Covers process connections, vertical mounting, and pump placement.
Explains the pin assignment for the 5-pin connector used for communication.
Covers general operating principles and essential precautions for using the device.
Explains how to navigate and use the device's display and menu interface.
Details the configuration and functionality of the device's analogue output.
Explains the settings and various functions for Digital Output 1.
Explains the settings and various functions for Digital Output 2.
Covers device functions like Language, Dosing, Media, General settings, Display, and Outputs.
Procedures for removing medium residue and handling hazardous materials before repair.
Lists possible error messages, their descriptions, and the device's behavior.
To Next Page
