20 Manufacturer's declaration
Manufacturer's declaration
In accordance with annex VII of the Directive 2014/68/EU
We, GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen-Criesbach, Germany
declare that the equipment listed below is designed and manufactured in accordance with the sound engineering practice ac-
cording to Article 4, Paragraph 1, c) ii of the Pressure Equipment Directive 2014/68.
Description
Ultrasonic flowmeter/pressure accessory:Max. permissible operating pressure:
0 to 16 bar (DN 10–15)
0 to 10 bar (DN 20–50)
Nominal sizes:
DN 10 to 15: PN 16
DN 20 to 50: PN 10
Type designation name: GEMÜ 3040 ultrasonic flowmeter
Classification of the valves: In accordance with Article 4, Paragraph 1, c); ii) sound en-
gineering practice
Additional information:
The products are developed and produced according to GEMÜ process instructions and quality standards which comply with
the requirements of ISO 9001.
In accordance with Article 4, Paragraph 3 of the Pressure Equipment Directive 2014/68/EU, these products must not be identi-
fied by a CE label.
The product may only be used for liquids. Gases are not permissible.
2020-06-26
Joachim Brien
Head of Technical Department
GEMÜ 3040www.gemu-group.com 33 / 34
20 Manufacturer's declaration