Gemalto SafeNet Luna Network HSM 7.0 User Manual

1 SafeNet Luna Network HSM Hardware Installation
5. If you have already installed SafeNet Luna Client software, consult the Configuration Guide to configure your
SafeNet Luna Network HSM and peripheral devices, if appropriate.
6. For maximum physical access security, when you are finished configuring the HSM, fit the locking bezel over the
HSM's faceplate. Certain security standards require the use of these physical access measures. The locks fit over
the posts highlighted below.
Turn the keys to the vertical position to lock the bezel. The keys cannot be removed if the bezel is unlocked. The
two locks are keyed differently, so the keys can be issued to different security personnel and kept in secure,
separate locations.
Note: Leaving the keys in the bezel may interfere with closing the rack door and compromise
security.
SafeNet Luna Network HSM Installation Guide
Release 7.0 007-013576-002 Rev. A June 2017 Copyright 2001-2017 GemaltoAll rights reserved.
25

Gemalto SafeNet Luna Network HSM 7.0 Specifications

General

Brand	Gemalto
Model	SafeNet Luna Network HSM 7.0
Category	Network Hardware
Language	English