User guide – Plotter Flexipen 120/165
Plan
13
If the test results are OK you can continue proceed and start plotting.
Chapter 7:
Installing and use the software
7.1 Installing the Gemini PLT Spooler program for plotter:
Close all Windows applications before starting the installation!
To install the program you must follow the next steps:
- Insert the installation CD-ROM for the Gemini PLT Spooler into the CD-ROM drive
of your computer;
- The installing kit folder will be opened and you will have to click on the ”setup.exe”;
- Follow the displayed instructions;
- After the installation is completed, click [Restart] to restart the computer.
To Next Page
Loading...