C or F display
.
Centigrade / Fahrenheit selection. The C/F jumper is on the back of the thermostat
control unit. Separate the control unit from the wall-mounted terminals.
.
When changed, the thermostat must be reset to activate the change. When
resetting, all custom settings and
programming will be erased
and only the Energy-
12/24 hour
.
The thermostat can display
time in 12 or 24 hour formats.
The 12/24 jumper is on the
back of the thermostat
(see illustration).
.
When changed, the
thermostat must be reset to
activate the change.
PG 12
4 Special Features cont.
A
C
W2
RC
O
B
RH
W
Y
G
SHORT C
ON F
SHORT24
OPEN12
GAS ELECT
Gas / Electric
jumper
o
C -
o
F
jumper
12-24hr
jumper
RESET
button
Inside of Unit
AA
AA
To Next Page
Loading...
